Covers all Upper Body Hydraulics
Ballistically Protects the Head, Neck & Chest.
All shields can be camouflaged as road reflectors to look less militant.
11” wide at the top, 4” wide at the bottom, 16” long
Capable of withstanding ballistic impact from any handgun, high powered riffle (7.62/5.56) -Even GREEN TIPS FROM POINT BLANK
Click here for more information or to order
All shields are coated on the front and back with anti-spalling material and can be ordered with covers to look like road reflectors.
The tactical webbing strap system is raised from the ballistic plate to allow for faster and easier hand-cuffing and magazine changes.
There is a life-time limited warranty on the steel plate.
Ballistic Resistance of Body Armor NIJ Standard-0101.06
2.4 Type III (Rifles)
Type III hard armor or plate inserts shall be tested in a conditioned state with 7.62 mm FMJ, steel jacketed bullets (U.S. Military designation M80) with a specified mass of 9.6 g (147 gr) and a velocity of 847 m/s ± 9.1 m/s (2780 ft/s ± 30 ft/s).
Type III flexible armor shall be tested in both the “as new” state and the conditioned state with 7.62 mm FMJ, steel jacketed bullets (U.S. Military designation M80) with a specified mass of 9.6 g (147 gr) and a velocity of 847 m/s ± 9.1 m/s (2780 ft/s ± 30 ft/s).
For a Type III hard armor or plate insert that will be tested as an in conjunction design, the flexible armor shall be tested in accordance with this standard and found compliant as a stand-alone armor at its specified threat level. The combination of the flexible armor and hard armor/plate shall then be tested as a system and found to provide protection at the system’s specified threat level. NIJ-approved hard armors and plate inserts must be clearly labeled as providing ballistic protection only when worn in conjunction with the NIJ-approved flexible armor system with which they were tested.